The Stratos Pier® System
Check out this video of how it works
The Stratos Pier® System
1.
All parts are machined and assembled using the latest technologies and are held to the highest standards in the industry.
2.
It adjusts to meet the footing even if the footing is not level, without losing any contact surface or integrity of the pier.
4.
The Stratos Pier® Torsion Joint has been engineered to allow for the footing of a structure to off by up to 8 degrees while insuring the Stratos Pier® will keep 100% contact with the footing without the use of grout or shims.
5.
The Stratos Pier® System has been engineered tested to meet or exceed ASTM standards, it has been installed under thousands of homes without incident or failure of any kind.
Stratos Pier® System is a concentrically loaded, unicentrically driven pier that has revolutionized the piering industry. Our patent pending technology makes the Stratos Pier® System the only truly adjustable pier on the market.
Galvanized Zinc Finish Available for the Stratos Pier®, Torsion Joint, Single Step Nut, Torsion Block, Stratos Plate, Double Step Nut, and Automated Welds
Other Company’s Piers
1.
Most other Foundation Piers are Eccentric Loading Piers. The building load is offset up to 4” from the shaft and is not in a straight line.
2.
Other Foundation Piers offset load causes Shaft buckling stresses excessive Pier head rotation.
3.
Other Foundation Piers are hollow pipe without any cast strengthening causing weakness.
4.
Other foundation piers require big heavy equipment to excavate and install with limited access to tight areas and interior applications.
5.
Other foundation piers use a lifting method that does not provide individual pier accuracy.